A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

IPEC Pipeline Toolbox | Temperature Drop Access Pipe Wall

Home

• Design Calculations
• Precommissioinig Calculations
IPEC Training
Promote Training Courses
Career
Tel: (+98 21) 88 53 67 51
(+98 21) 88 50 76 82
Fax:(+98 21) 88 76 37 93
E-mail:info@ipecgroup.net
Company Profile
2013 Ver.

Archive

Temperature Drop Access Pipe Wall

This module calculates the temperature across the pipe wall containing the temperatures of all coating interfaces. Knowing the temperature profile helps us to calculate the heat loss from the wall to the ambient and thus the temperature of working fluid along the pipeline will be known. In other application the temperature drop across the pipe wall helps to choose the appropriate coating for the pipeline.

i.e: 32 in or 100 mm

i.e: 25 °C or 300 K

i.e: 25 °C or 300 K

i.e: 0.5 in or 20 mm

i.e: 0.5 in or 20 mm

i.e: 0.5 in or 20 mm

i.e: 50 cm or 350 mm

i.e: 43 W/m°C or 3500 cal/m.hr.K

i.e: 43 W/m°C or 3500 cal/m.hr.K

i.e: 43 W/m°C or 3500 cal/m.hr.K

You can select predifined values: Water @ 20°C

You can select predifined values: Water @ 20°C

You can select predifined values: Water @ 20°C

You can select predifined values: Water @ 20°C

i.e: 4200 J/Kg*K or 1 btu/lbm*R

i.e: 4200 J/Kg*K or 1 btu/lbm*R

i.e: 500 m3/hr or 100 liter/s

i.e: 20 m/s or 10 ft/s

References

1. Theodore L. Bergman, Adrienne S.Lavine, Frank P.Incropera, David P.DeWitt, 2007, fundamentals of heat and mass transfer, John Wiley & Sons, USA
2. http://www.engineeringtoolbox.com